準絕對長度和位置檢測/電池支持，BMIX磁體，電池支持的準絕對編碼器永久位置檢測，甚至在斷電情況下。
ELGO測量系統BMIX采用磁敏感元件的長度和位置測量的物理原理。它用于高精度檢測位置、移動路徑和/或速度?；谶@種無磨損和無接觸的單軌測量系統，ELGO提供了這些“準絕對”的版本。在傳感器殼體中集成的可充電電池線將增量測量系統轉換成準絕對測量系統，因為目前的位置——甚至在斷電狀態——在內部被永久檢測和進一步處理。在最佳充電和環境條件下，電池的運行時間在斷開電源電壓后可持續最多6個月。準絕對長度和位置檢測
甚至在斷電情況下也能檢測到運動
基于磁性的測量技術
無磨損，非接觸式測量原理
模擬輸出接口(電壓或電流，CANopen (DS406)接口要求
高強度和抗振動性
抗灰塵、污垢、煙霧和水
MECHANICAL DATA
| Measuring principle | incremental, quasi-absolute |
| Repeat accuracy | ±?1 increment |
| System accuracy in μm at 20 °C | ± (1000 + 20 x L), L= measuring length in meters |
| Distance sensor/ tape | max. 10 mm |
| Sensor housing material | ABS plastic |
|
Housing dimensions (L x W x H) |
100?x?12 x?25 mm |
| Required magnetic tape | MB20-160-10-1-R |
| Pole pitch | 16 mm |
| ?Max. measuring length | theoretically unlimited |
| Type of connection |
standard: open cable ends, optional: D-SUB or round connector |
| Sensor cable | 1.5 m standard length,? others on request |
| Weight | measuring system: approx.?120 g; cable: approx. 60g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC |
| Residual ripple | < 10 % |
| Current consumption | max. 150 mA |
| Battery operating time |
with movement: approx. 16 days after power-off without movement / in storage: approx. 32 days after power-off |
| Charging time before first use | 4 h |
| Interfaces |
12 bit analog output 0 ... 20 mA, 12 bit analog output 4 ... 20 mA, 12 bit analog output 0.5 ... 4.5 V, 12 bit analog output 0 ... 10 V, CANopen (DS406) |
| Resolution | 1 mm |
| Max. operating speed | 2 m/s |
ENVIRONMENTAL CONDITIONS
| Storage temperature | -20?... +45 °C |
| Operating temperature - charging process | 0 ... +45 °C |
| Operating temperature - battery operation | -20 ... +45 °C |
| Humidity | 95 %, non-condensing |
| Protection class | IP67 |