BMIX磁性電池支持的準絕對編碼器永久位置檢測，即使在斷電的情況下
ELGO測量系統BMIX基于使用磁敏元件測量長度和位置的物理原理。它用于位置、長度或速度的高精度檢測。集成在傳感器外殼中的可充電電池線將增量測量系統轉換為準絕對測量系統，因?yàn)榧词乖跀嚯姞顟B(tài)下，當前位置也能被永久檢測并在內部進一步處理。在最佳充電和環境條件下，斷開電源后，電池的工作時間長達6個月。- 準絕對長度和位置檢測
- 甚至在斷電情況下也能檢測到運動
- 成熟的磁性測量技術
- 無磨損、無接觸測量原理
- 模擬輸出接口(電壓或電流，CANopen (DS406)接口
- 高抗裂性和抗振性
- 強大的防塵、防污、防煙和防水功能
MECHANICAL DATA
| Measuring principle | incremental, quasi-absolute |
| Repeat accuracy | ±?1 increment |
| System accuracy in μm at 20 °C | ± (1000 + 20 x L), L= measuring length in meters |
| Distance sensor/ tape | max. 10 mm |
| Sensor housing material | ABS plastic |
|
Housing dimensions (L x W x H) |
100?x?12 x?25 mm |
| Required magnetic tape | MB20-160-10-1-R |
| Pole pitch | 16 mm |
| ?Max. measuring length | theoretically unlimited |
| Type of connection |
standard: open cable ends, optional: D-SUB or round connector |
| Sensor cable | 1.5 m standard length,? others on request |
| Weight | measuring system: approx.?120 g; cable: approx. 60g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC |
| Residual ripple | < 10 % |
| Current consumption | max. 150 mA |
| Battery operating time |
with movement: approx. 16 days after power-off without movement / in storage: approx. 32 days after power-off |
| Charging time before first use | 4 h |
| Interfaces |
12 bit analog output 0 ... 20 mA, 12 bit analog output 4 ... 20 mA, 12 bit analog output 0.5 ... 4.5 V, 12 bit analog output 0 ... 10 V, CANopen (DS406) |
| Resolution | 1 mm |
| Max. operating speed | 2 m/s |
ENVIRONMENTAL CONDITIONS
| Storage temperature | -20?... +45 °C |
| Operating temperature - charging process | 0 ... +45 °C |
| Operating temperature - battery operation | -20 ... +45 °C |
| Humidity | 95 %, non-condensing |
| Protection class | IP67 |