MAX3緊湊型絕對測量系統非常適合移動自動化中的線性應用
MAX3是一種磁性絕對長度測量系統，設計用于測量最長2450 mm的長度。由于其緊湊的設計、非接觸和無磨損的測量原理以及其高IP65防護等級，該測量系統特別適合在惡劣環境中使用。因此，MAX3非常適合移動自動化應用。MAX3的一個主要優勢是其緊湊的設計，這使得它同樣適用于現有機器和車輛的改裝和新安裝。后續電子設備的可用接口有CANopen (DS406編碼器配置文件)或模擬輸出信號(V或mA)。- 分辨率為1毫米的絕對編碼器
- 無磨損和無接觸
- 測量長度可達2450毫米
- 帶用于距離控制傳感器/磁帶的LED
- 接口:CANopen (DS406)或模擬輸出
MECANICAL DATA
| Measuring principle | absolute |
| Repeat accuracy | ±?1 increment |
| System accuracy in μm at 20 °C | ± 1 mm at max. 2450 mm measureing length (standard) |
| Distance sensor/tape | min. 0.25 mm, max. 1.0 mm |
| Sensor housing material | galvanized aluminium |
|
Housing dimensions (L x W x H) |
52 x?16 x?30 mm |
| Required magnetic tape | AB20-21-10-1-R-D-10 (10 mm) or AB20-21-20-1-R-D-10 (20 mm) |
| Pole pitch | 2.1?mm |
| ?Max. measuring length | 2450 mm |
| Type of connection | Standard: open cable ends, optionally: 5-pin M12 round connector (other connectors on request) |
| Sensor cable | 1.5 m standard length, others on request, drag chain suitable |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx.?50 g without cable, cable: approx. 60 g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC ± 10 % |
| Residual ripple | < 10 % |
| Current consumption | max. 80 mA |
| Interfaces |
CANopen standard (DS406) 12 bit analog output (0 ... 20 mA) 12 bit analog output (4 ... 20 mA) 12 bit analog output (0,5 ... 4,5 V) 12 bit analog output (0 ... 10 V) SSI (binary or Gray) on request |
| Resolution | 1 mm |
|
Max. operating speed |
2 m/s |
| Further options | option A (CANopen without termination resistor) |
ENVIRONMMENTAL CONDITIONS
| Storage temperature | -25 ... +85 °C |
| Operationg temperature | -25 ... +85 °C |
| Humidity | 95 %, non-condensing |
| Protection calass | IP40 (standard), IP65 (option V) |