Magnetic layer material	elastomer bonded hard ferrite
Carrier material	ferromagnetic steel 1.4104 (others on request)
Single pitch error	46 [m°]*
Position error	23 [m°]pp
Peripheral speed	10 [m/s]*
Max. pulses / revolution	interp. factor x number of poles
Rotation speed	max. 6000 [rpm]*
Temperature range	-40 ... +85 °C
Protection class	IP68
Maximum humidity	95%, non-condensing

? * based on a reference diameter of 100 mm Influence of external magnets:
External magnetic flux density must not exceed 64 mT (field strength lower 52kA/m) on the surface of the magnetic ring because this could damage or destroy the magnetic pattern on the ring. Each external magnetic flux density will reduce the accuracy of the system. Lower flux density than 10 mT (the remanence of normal steel is lower) will have only a weak influence.